สอบถามรายละเอียดสินค้า/ปรึกษาปัญหาการใช้งาน/ขั้นตอนการส่งเคลม
ผ่านช่องทางข้อความถึงทางร้าน
แจ้งอาการหรือถ่ายรูปลักษณะปัญหา เพื่อแก้ปัญหาเบื้องต้น ถ้าไม่สามารถแก้ไขได้ให้ส่งสินค้ามาเคลม

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
️Performance
Fan Speed: 200 – 1800 rpm
Air Flow: 104CFM / 176 m/h (@ 1800 RPM)
Static Pressure: 2.35 mm H₂O
Noise Level: 0.6 Sone (@ 1800 RPM)
Operating Ambient Temperature: 0 – 40 C

️Fan
Fan Frame: BioniX
Control Type: PWM PST
Connector: 4-Pin-Connector + 4-Pin-Socket
Fan Bearing: Fluid Dynamic Bearing

️Electric Characteristics:
Typical Voltage: 12 V DC
Starting Voltage: 4.8 V
Current/ Voltage: 0.20 A / 12 V
Cable Lenght: 400 mm

️Size Weight
140 mm X140 mm x 28 mm
Weight: 184 g

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Extended Life Span
10 C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore we extend the warranty to 10 years.

Maximum Quietness Minimum Vibration
Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise.
ARCTICs new motor of the BioniX Fans eliminates vibrations directly at its source in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus there is no need for rubber spacers due to the steady torque and smoother switching of the magnet field.

200 to 1800 RPM
With a wide range of regulation and the PWM Sharing Technology (PST) the BioniX F140 fan speed can be controlled synchronously with all your other fans together and thus keep the noise at a minimum while guaranteeing maximum cooling performance when needed.

Optimised Fan Design
We further optimised the fan blade design to get a higher
airflow at lower noise generation. This guarantees high
pressure and highly efficient ventilation for your
gaming case.

Enhanced Bearing
Due to a new alloy/lubricant combination developed in Germany the friction within the bearing is reduced and a greater efficiency is achieved. This way there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler.

Two Way Installation
-Blow warm air out of the case
-Draw cool air into your case