– โปรดอ่านคู่มือ จาก EKWB website ก่อนใช้งาน

Details

EK-CryoFuel Loop Cleaner + Superflush is a safe and reliable loop-cleaning and flushing kit. It has been developed to clean your used custom water cooling loop or prepare a new one leaving it free of any impurities or manufacturing residues. It consists of two items of which both are concentrates and require dilution with distilled water before use.

EK-Cryofuel Loop Cleaner
This is a liquid cooling system and radiator cleaner. The purpose of the EK-Cryofuel Loop Cleaner is to clean your existing loop before pouring in new coolant or to prepare a new unused custom loop fully. It removes any manufacturing residues impurities and old coolant stains. This is not a stand-alone product as it requires a subsequent use of the Superflush solution to pick up any residue from the cleaner and ensure maximum stability of your new coolant. It can improve the performance of your water cooling system.

EK-Cryofuel Loop Cleaner comes as a concentrate in a 250ml bottle and should be mixed with 1250ml (1:5 ratio) of distilled water before use. It is poured into an empty water-cooling system and left to circulate from 2 to 24 hours. This solution does not act as a corrosive inhibitor or biocide for coolants. It should not be left in the system for periods significantly longer than suggested.

Compatible with all EK soft and hard tubing.

EK-Cryofuel Loop Superflush
This is a solution made to flush out manufacturing residues impurities and leftover chemicals. It can be used either as a stand-alone solution or after the EK-CryoFuel Loop Cleaner.

After using EK-CryoFuel Loop Cleaner to clean gunk and old coolant Superflush is used to pick up and rinse any residue chemicals left from the Cleaner.

The concentrate is to be mixed with approximately 2750ml of distilled water (1:11 ratio). This solution does not act as a corrosive inhibitor or biocide for coolants. Compatible with all EK soft and hard tubing.

PLEASE NOTE: